筛选Filter
All products
Products
ADP5054ACPZ-R7 LFCSP-48 – Quad Buck Regulator Integrated Power Solution
Analog Devices ADP5054ACPZ quad synchronous buck regulator with 4.5V‑15.5V input, programmable 6A output per channel, 250kHz‑2MHz switching – ideal for FPGA and SoC power.
Stock Count: 6500
Price:$TBD
AD22100SRZ SOIC8 – Voltage Output Temperature Sensor with Signal Conditioning in Stock
Analog Devices AD22100SRZ analog temperature sensor with ‑50°C to +150°C range, 22.5mV/°C ratiometric output, and built‑in signal conditioning – ideal for HVAC, industrial, and automotive applications.
Stock Count: 12863
Price:$TBD
LTC3779HFE#TRPBF LTC3779HFE#PBF TSSOP38– 150V Extended‑Temperature Synchronous Buck‑Boost DC/DC Controller
Analog Devices LTC3779HFE 150V synchronous buck‑boost DC/DC controller with 4.5V‑150V input/output, up to 99% efficiency, and ‑40°C to +150°C junction temperature – ideal for automotive, industrial, and military high‑reliability power designs.
Stock Count: 4055
Price:$TBD
LTC3779IFE#TRPBF LTC3779IFE#PBF TSSOP38-– 150V Synchronous Buck‑Boost DC/DC Controller
Analog Devices LTC3779IFE 150V synchronous buck‑boost DC/DC controller with 4.5V‑150V input/output, up to 99% efficiency, and ‑40°C to +125°C operation. Ideal for industrial, automotive, and medical power designs.
Stock Count: 5066
Price:$TBD
LTC3779EFE#TRPBF LTC3779EFE#PBF TSSOP38-150V Synchronous Buck‑Boost DC/DC Controller
Analog Devices LTC3779EFE 150V synchronous buck‑boost DC/DC controller with 4.5V‑150V input/output, up to 99% efficiency – ideal for industrial, automotive, medical, and military power designs.
Stock Count: 9999
Price:$TBD
ADAU1777BCBZRL WLCSP-36 Low‑Latency Audio Codec with DSP for ANC
Analog Devices ADAU1777BCBZRL low‑power audio codec with 4 ADCs, 2 DACs, audio processor, 5µs latency, 102dB SNR – ideal for ANC headphone designs.
Stock Count: 10550
Price:$TBD
LTC2376CMS-18#TRPBF MSOP8 – 18‑Bit 250ksps SAR ADC with 102dB SNR
Analog Devices LTC2376CMS-18#TRPBF 18‑bit 250ksps low power SAR ADC with 102dB SNR, ±1.75LSB INL, SPI interface, and digital gain compression. Ideal for medical imaging and data acquisition.
Stock Count: 3451
Price:$TBD
LTC1293DCSW#TRPBF SOP16 – 12‑Bit Data Acquisition System
Analog Devices LTC1293DCSW#TRPBF 12‑bit data acquisition system with 8‑channel MUX, SAR ADC, 46.5 kS/s, and serial/parallel interface. Ideal for process control and battery instruments.
Stock Count: 2650
Price:$TBD
AD6674BCPZ-1000 AD6674BCPZRL7-1000 LFCSP-64 –385 MHz Bandwidth IF Diversity Receiver with Dual 14‑Bit 1000 MSPS ADCs
Analog Devices AD6674BCPZ‑1000 385 MHz IF diversity receiver with dual 14‑bit 1000 MSPS ADCs, JESD204B output, NSR, and VDR. Ideal for 4G/5G, radar, and broadband wireless.
Stock Count: 1950
Price:$TBD
AD6674BCPZ-500 AD6674BCPZRL7-500 LFCSP-64 385 MHz Bandwidth IF Diversity Receiver with Dual 14‑Bit 500 MSPS ADCs
Analog Devices AD6674BCPZ‑500 385 MHz IF diversity receiver with dual 14‑bit 500 MSPS ADCs, JESD204B output, NSR, and VDR. Ideal for 4G/5G, radar, and broadband wireless.
Stock Count: 9650
Price:$TBD
AD6674BCPZRL7-750 LFCSP-64 – 385 MHz Bandwidth IF Diversity Receiver with Dual 14‑Bit ADCs
Analog Devices AD6674BCPZRL7‑750 385 MHz IF diversity receiver with dual 14‑bit 750 MSPS ADCs, JESD204B output, NSR, and VDR. Ideal for 3G/4G/LTE and broadband wireless.
Stock Count: 3960
Price:$TBD
AD1674JRZ SOP28 12‑Bit 100 kSPS ADC – Sampling Converter
Analog Devices AD1674JRZ 12‑bit 100 kSPS SAR ADC with on‑board SHA, 10V reference, parallel interface, and flexible ±5V/±10V inputs. Ideal for data acquisition and instrumentation.
Stock Count: 3620
Price:$TBD
ADUCM420BCBZ WLCSP-64– Precision MCU with Arm Cortex-M33 & 12-Bit ADC
Analog Devices ADUCM420BCBZ precision analog microcontroller with 160MHz Arm Cortex-M33, 512KB Flash, 12-bit 2MSPS ADC, 12 DACs, and MDIO interface. Ideal for optical networking and industrial control.
Stock Count: 2194
Price:$TBD
ADSP-21562KSWZ4 – 400MHz SHARC+ DSP for Automotive and Consumer Audio Applications
Analog Devices ADSP-21562KSWZ4 SHARC+ single‑core DSP with 400MHz instruction rate, 640KB L1 SRAM, and DDR3 interface. Ideal for automotive audio, ANC, and consumer sound systems.
Stock Count: 1685
Price:$TBD
TPD3F303DPVR EMI Filter | 3-Channel | 300MHz | USON-8 Package | Texas Instruments
The TPD3F303DPVR is a highly integrated three-channel EMI filter and ESD protection device from Texas Instruments (TI). It employs a C-R-C low-pass filter topology to provide EMI filtering (-3dB bandwidth of 300MHz) for the data, clock, and reset lines of SIM card interfaces, while integrated TVS diode arrays offer IEC 61000-4-2 Level 4 ESD protection (±15kV contact discharge) for the signal lines and the VCC power line. The device integrates 47Ω (clock line) and 100Ω (data, reset lines) termination resistors and is housed in an ultra-small USON-8 package (2.1×1.6mm), operating over a temperature range of -40°C to +85°C. It is ideal for portable devices such as smartphones, tablets, and mobile hotspots. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 9999
Price:$TBD
M24M01E-FMN6TP EEPROM | 1Mbit | I2C Interface | 1MHz | 8-SOIC Package | STMicroelectronics
The M24M01E-FMN6TP is a 1Mbit (128K x 8) serial I²C bus EEPROM from STMicroelectronics, supporting clock frequencies up to 1MHz (Fast-Mode Plus). Housed in an 8-SOIC package, it operates from 1.6V to 5.5V across a temperature range of -40°C to +85°C, with ultra-low power consumption (350nA typical standby, 100µA/400µA typical read/write) . The device integrates Configurable Device Address (CDA), Software Write Protection (SWP), and Device Type Identifier (DTI) registers, with hardware write protection support . It offers over 4 million write cycles and 200-year data retention , making it ideal for consumer electronics, industrial control, communication equipment, and other applications requiring non-volatile parameter storage. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 50000
Price:$TBD
DRV8300DRGER Gate Driver | 100V | 750mA/1.5A | VQFN-24 Package | Texas Instruments
The DRV8300DRGER is a 100V three-phase half-bridge gate driver from Texas Instruments (TI), designed to drive N-channel power MOSFETs in brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) applications. The device integrates three independent half-bridge drivers, supporting up to 750mA peak source current and 1.5A sink current for fast switching of power MOSFETs to reduce switching losses. This variant features the DRV8300D architecture with integrated bootstrap diodes, using external capacitors to generate the gate drive voltage for high-side MOSFETs. It supports a 5V to 20V gate drive supply (GVDD), operates from -40°C to +125°C, and is housed in a 4×4mm VQFN-24 package, available in tape & reel (3,000 pieces/reel). Key features include adjustable dead-time, cross-conduction prevention, and BST/GVDD undervoltage lockout, making it ideal for drones, power tools, robotics, industrial automation, and other three-phase motor drive applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 30000
Price:$TBD
AD8572ARZ-REEL Zero-Drift Op Amp | 1.5MHz | Dual Channel | 8-SOIC Package | Analog Devices
The AD8572ARZ-REEL is a dual-channel, zero-drift, rail-to-rail input/output operational amplifier from Analog Devices (ADI), part of the AD857x family. This device features ultra-low offset voltage (1µV typical) and extremely low offset voltage drift (0.005 µV/°C), operating from a single 2.7V to 5V supply. It offers a 1.5MHz gain bandwidth product, 0.4V/µs slew rate, 140dB typical CMRR, and 145dB typical high gain, making it ideal for precision signal conditioning, sensor interfaces, and medical instruments where error sources cannot be tolerated. The device is housed in a standard 8-SOIC package (3.90mm wide) and operates over a -40°C to +125°C temperature range. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 15000
Price:$TBD
TPS74518PQWDRVRQ1 LDO Regulator | 1.8V/500mA | 6-WSON Package | Texas Instruments Automotive Grade
The TPS74518PQWDRVRQ1 is a 500mA ultra-low-dropout (LDO) linear regulator from Texas Instruments (TI), part of the TPS745-Q1 family. This device provides a fixed 1.8V output voltage, supports an input range of 1.5V to 6.0V, and features a typical dropout voltage of 225mV. It offers high PSRR of 45dB at 100kHz and ±1.5% output accuracy, integrating power-good (PG) indication, enable control, output discharge, overcurrent protection, and thermal shutdown. This device is AEC-Q100 qualified for automotive applications, housed in a 6-WSON (2×2mm) wettable-flank package, and operates from -40°C to +125°C. It is ideal for automotive infotainment, camera modules, instrument clusters, radar, and other space-constrained, high-reliability applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 12000
Price:$TBD
ADM2483BRWZ-REEL Isolated RS-485 Transceiver | 500kbps | 2500Vrms Isolation | 16-SOIC Package | Analog Devices
The ADM2483BRWZ-REEL is an integrated, galvanically isolated half-duplex RS-485 transceiver from Analog Devices (ADI). Using iCoupler® technology, it combines a 3-channel isolator, a three-state differential line driver, and a differential input receiver in a single package . The device complies with ANSI EIA/TIA-485-A and ISO 8482:1987(E) standards, supports data rates up to 500kbps, and offers common-mode transient immunity (CMTI) of 25kV/µs . The logic side operates from a 3V or 5V supply, while the bus side requires a 5V supply only, with an operating temperature range of -40°C to +85°C . The device supports up to 256 nodes on the bus and features slew-rate-limited driver outputs and true fail-safe receiver inputs . Housed in a 16-SOIC wide-body package (7.50mm), it is available in tape and reel packaging (1000 pieces/reel) and is ideal for low-power RS-485/RS-422 networks, isolated interfaces, building control networks, and multipoint data transmission systems . We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 14771
Price:$TBD
ADM660ARZ-REEL7 Charge Pump Voltage Converter | 1.5-7V Input | 100mA Output | SOIC-8 Package | Analog Devices
The ADM660ARZ-REEL7 is a CMOS switched-capacitor voltage converter (charge pump) from Analog Devices (ADI) that can invert (VOUT = -VIN) or double (VOUT = 2×VIN) the input supply voltage. Input voltages from +1.5V to +7V can be inverted to a -1.5V to -7V negative output supply, making it ideal for generating a negative rail in single-supply systems. The device requires only two small external capacitors, delivers up to 100mA output current, and achieves >90% efficiency at 50mA and >80% at 100mA. The FC pin selects 25kHz or 120kHz charge-pump operation to optimize capacitor size and quiescent current. This device is a pin-compatible upgrade for MAX660, MAX665, and ICL7660. Housed in an SOIC-8 package, it operates from -40°C to +85°C and is ideal for handheld instruments, portable computers, remote data acquisition, and op-amp power supplies. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 9999
Price:$TBD
FS800R07A2E3 IGBT Module | 650V/700A | HybridPACK2 Package | Infineon Automotive Grade
The FS800R07A2E3 is an automotive-grade IGBT power module from Infineon, featuring advanced Trench/Field Stop IGBT3 technology and Emitter Controlled 3 diodes. This device is housed in the HybridPACK™ 2 package, integrating 6 N-channel IGBTs in a three-phase inverter configuration with a built-in NTC thermistor for temperature monitoring. It offers a maximum collector current of 700A, a collector-emitter voltage of 650V, and a maximum power dissipation of 1500W. This module is specifically designed for traction inverter applications in hybrid and electric vehicles (xEV), supporting up to 100kW of continuous power. We supply 100% original, new products with fast delivery and professional technical support.
Stock Count: 200
Price:$TBD
ATA663211-GAQW LIN Transceiver | 5-28V | SOIC-8 Package | Microchip Automotive Grade
The ATA663211-GAQW is a fully integrated LIN transceiver from Microchip, compliant with LIN specifications 2.0, 2.1, 2.2, 2.2A and SAEJ2602-2. It serves as the interface between the LIN protocol controller and the physical bus, supporting data communication up to 20kbps for low-speed in-vehicle networks such as body control, sensors, and convenience electronics. The device operates from 5V to 28V with 40V transient withstand capability, features ultra-low sleep current (9µA typical), and provides comprehensive protection (bus fault, undervoltage, overtemperature, short-circuit). It supports local and bus wake-up with wake-up source recognition. Housed in a standard SOIC-8 package, it is AEC-Q100 qualified and operates from -40°C to 150°C. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 32000
Price:$TBD
STM32G070RBT6 32-bit MCU | 64MHz | 128KB Flash | 64-LQFP Package | STMicroelectronics
The STM32G070RBT6 is a 32-bit microcontroller from STMicroelectronics based on the Arm Cortex-M0+ core, part of the STM32G0 mainstream value line . It operates at speeds up to 64MHz and features 128KB of Flash memory and 36KB of SRAM, housed in a 64-LQFP package (10x10mm) . The device integrates a rich set of peripherals including 4x USART, 2x SPI, 2x I2C, a 12-bit ADC (up to 19 channels), and multiple 16-bit timers. It supports a wide operating voltage of 2.0V to 3.6V and a temperature range of -40°C to +85°C . This MCU is ideal for industrial control, consumer electronics, smart home appliances, IoT nodes, and other applications requiring high cost-performance and low power consumption . We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 9560
Price:$TBD
UCC2895DWTR Phase-Shifted Full-Bridge Controller | 1MHz | 20-SOIC Package | Texas Instruments
The UCC2895DWTR is an enhanced phase-shifted full-bridge PWM controller from Texas Instruments (TI), serving as an upgrade to the UCC3895 . It achieves control of the full-bridge power stage through phase-shift switching, enabling resonant zero-voltage switching (ZVS) for high efficiency at high frequencies . The device supports voltage-mode, peak current-mode, or average current-mode control and operates at frequencies up to 1MHz with a typical supply current of just 5mA at 500kHz . Housed in a 20-pin SOIC package (7.5mm wide), it operates from a 10V to 16.5V supply across a temperature range of -40°C to +85°C . This controller features programmable output on-delay, adaptive delay set, bidirectional oscillator synchronization, 0% to 100% duty cycle control, and programmable soft start/stop . It is ideally suited for off-line power supplies, telecom and datacom power supplies, distributed power architectures, and high-density power modules . We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 8000
Price:$TBD
ADXRS453BRGZ Digital Gyroscope | ±300°/s | SPI Interface | SOIC-16 Package | ADI High-Vibration Industrial Grade
The ADXRS453BRGZ is a high-vibration rejection digital Z-axis (yaw) angular rate gyroscope from Analog Devices (ADI), designed specifically for harsh industrial environments with shock and vibration. It employs an advanced differential quad-sensor design that effectively rejects the influence of linear acceleration, offering typical vibration rejection of 0.01°/sec/g. The device provides a ±300°/s measurement range and outputs 16-bit digital data via an SPI interface with a sensitivity of 80 LSB/(°/s). Housed in a 16-lead SOIC-CAV plastic cavity package, it operates from a 3.15V to 5.25V supply with a typical current of 6mA and covers a temperature range of -40°C to +105°C. Built-in continuous self-test architecture and temperature compensation ensure long-term stability and reliability. This gyroscope is ideal for industrial equipment, platform stabilization, instrumentation, and other high-performance applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 6000
Price:$TBD
LIS2DW12TR 3-Axis Accelerometer | ±2/4/8/16g | I2C/SPI | LGA-12 Package | STMicroelectronics Ultra-Low Power
The LIS2DW12TR is a high-performance, ultra-low-power 3-axis digital MEMS accelerometer from STMicroelectronics, part of the "femto" family. It features user-selectable full scales of ±2g/±4g/±8g/±16g and outputs 16-bit digital data via I²C or SPI interfaces. Housed in a compact 12-LGA package (2x2x0.7mm), it operates from a 1.62V to 3.6V supply. With typical power consumption of 50nA in power-down mode and below 1µA in active low-power mode, this device is ideal for wearables, TWS earbuds, IoT sensor nodes, hearing aids, and portable healthcare devices requiring extended battery life and motion detection. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 10000
Price:$TBD
TPD3S716QDBQRQ1 USB Interface Protection IC | 18V OVP | 2.4A Adjustable Current Limit | 16-SSOP Package | Texas Instruments Automotive Grade
The TPD3S716QDBQRQ1 is an automotive-grade single-chip USB interface protection device from Texas Instruments (TI), providing short-to-battery, short-circuit, and ESD protection for the VBUS and data lines (D+/D-) of automotive USB ports. The device integrates high-bandwidth (1GHz) data switches that support USB2.0 high-speed data rates while delivering up to 18V overvoltage protection. Its VBUS pin supports an adjustable current limit from 0.5A to 2.4A, compatible with USB BC1.2 and USB Type-C charging schemes. Housed in a 16-SSOP package, it operates over a temperature range of -40°C to +125°C and is AEC-Q100 qualified. This device is ideal for automotive infotainment systems, USB hubs, and other in-vehicle applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 9999
Price:$TBD
TPS259571DSGT eFuse | 2.7-18V | 4A | 34mΩ | WSON-8 Package | Texas Instruments
The TPS259571DSGT is a highly integrated electronic fuse (eFuse) from Texas Instruments (TI), part of the TPS2595xx family. The device operates over a wide input voltage range of 2.7V to 18V and can deliver up to 4A of continuous output current with an accurate 0.5A to 4A adjustable current limit. It integrates an internal FET with a low on-resistance of 34mΩ (typical) and features fast overvoltage protection clamp (5µs typical response time), over-temperature protection, undervoltage lockout, and adjustable output slew rate control. Housed in a compact 8-WSON package (2x2mm), it operates over a temperature range of -40°C to +125°C. This device is ideal for hot-swap systems, solid-state drives (SSD), industrial systems, and set-top boxes. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 10000
Price:$TBD
MKW36A512VHT4 Wireless MCU | BLE 5.0 | 48MHz | 512KB Flash | 64-VFLGA Package | NXP Automotive Grade
The MKW36A512VHT4 is an ultra-low-power, highly integrated single-chip wireless MCU from NXP’s Kinetis W series, featuring a Bluetooth® 5.0 and generic FSK radio transceiver. It is built around a 48MHz ARM Cortex-M0+ core with 512KB of Flash (with ECC) and 64KB of SRAM, supporting up to 8 concurrent BLE connections. Housed in a 64-VFLGA package (7x7mm), it operates from 1.71V to 3.6V, with receive current of 6.3mA and transmit current of 5.7mA (at 0dBm), maximum output power of +5dBm, and sensitivity of -95dBm (1Mbps). The device covers a wide temperature range of -40°C to +105°C and is AEC-Q100 automotive qualified. It is ideally suited for automotive electronics (e.g., tire pressure monitoring, passive entry), industrial control, medical devices, and embedded systems requiring low-power wireless connectivity. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 19000
Price:$TBD
PIC16LF1933T-I/SO 8-bit MCU | 32MHz | 7KB Flash | 28-SOIC Package | Microchip
The PIC16LF1933T-I/SO is an 8-bit ultra-low-power (XLP) Flash microcontroller from Microchip, built on an enhanced mid-range RISC architecture with only 49 instructions to learn. It operates at speeds up to 32MHz and features 7KB of Flash program memory, 256 bytes of RAM, and 256 bytes of EEPROM. Housed in a 28-pin SOIC package, it supports a wide operating voltage range of 1.8V to 3.6V and a temperature range of -40°C to +85°C. The device integrates a versatile set of peripherals including an up to 60-segment LCD driver, 11-channel 10-bit ADC, 5 timers, multiple communication interfaces (I2C, SPI, EUSART), and capacitive touch sensing modules. It is ideal for industrial control, consumer electronics, medical devices, and applications requiring low power consumption and segment LCD displays. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 8000
Price:$TBD
MAX2870ETJ+T Frequency Synthesizer | 23.5MHz~6GHz | TQFN-32 Package | Analog Devices / Maxim
The MAX2870ETJ+T is an ultra-wideband phase-locked loop (PLL) frequency synthesizer from Analog Devices (ADI) / Maxim Integrated, featuring integrated voltage-controlled oscillators (VCOs) and supporting both integer-N and fractional-N modes. It is capable of synthesizing frequencies from 23.5MHz to 6.0GHz while maintaining superior phase noise and spurious performance. Housed in a 5mm x 5mm, 32-pin TQFN package, it operates from a 3.0V to 3.6V supply across a -40°C to +85°C temperature range. The device provides dual differential output drivers, independently programmable for -4dBm to +5dBm output power, making it ideal for high-performance RF applications including wireless infrastructure, test and measurement, satellite communications, and clock generation. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 5000
Price:$TBD
TS5A23157RSER Dual Analog Switch | SPDT | 10Ω | UQFN-10 Package | Texas Instruments
The TS5A23157RSER is a dual single-pole double-throw (SPDT) analog switch from Texas Instruments (TI), designed for single-supply operation from 1.65V to 5.5V. It features an ultra-low 10Ω on-resistance and supports a bandwidth up to 220MHz, allowing bidirectional transmission of digital and analog signals up to 5.5V (peak). Housed in a compact 10-pin UQFN package (1.5×2mm), the device offers break-before-make switching, low charge injection, and low total harmonic distortion, making it ideal for sample-and-hold circuits, audio/video signal routing, and battery-powered equipment. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 10000
Price:$TBD
M24C64-DRMF3TG/K 64Kbit EEPROM | I2C Interface | 1MHz | 8-MLP Package | STMicroelectronics Automotive Grade
The M24C64-DRMF3TG/K is a 64Kbit (8K x 8) automotive-grade serial EEPROM from STMicroelectronics, supporting I2C bus communication up to 1MHz. Housed in an ultra-compact 8-MLP (2x3mm) package, it operates over a wide voltage range of 1.8V to 5.5V and a temperature range of -40°C to +125°C, with AEC-Q100 Grade 1 qualification. This device integrates Error Correction Code (ECC) logic for data integrity, along with hardware write protection, noise suppression, and Power-On Reset (POR) functions. It features a 4ms write cycle time and 100-year data retention. This device is ideal for automotive electronics, industrial controls, and various applications requiring high-reliability non-volatile memory. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 5000
Price:$TBD
DAC60501ZDQFR 12-bit DAC | SPI/I2C Interface | WSON-8 Package | Texas Instruments
The DAC60501ZDQFR is a high-precision, low-power, 12-bit voltage-output digital-to-analog converter (DAC) from Texas Instruments (TI). Part of the DACx0501 family, it integrates a 2.5V, 5ppm/°C high-precision internal voltage reference, providing full-scale output ranges of 1.25V, 2.5V, or 5V. The device features a pin-selectable serial interface (SPI up to 50MHz or I2C) and includes a power-on-reset (POR) circuit that ensures the DAC output powers up at zero scale or midscale. Housed in an ultra-compact 8-pin WSON package (2mm×2mm), it operates from 2.7V to 5.5V across a -40°C to +125°C temperature range. This device is ideal for oscilloscopes, data acquisition, base stations, analog output modules, and industrial control applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 5000
Price:$TBD
LAN8720AI-CP-TR Ethernet PHY Transceiver | 10/100Mbps | RMII | QFN-24 Package | Microchip
The LAN8720AI-CP-TR is a high-performance, low-power, small-footprint 10BASE-T/100BASE-TX Ethernet physical layer transceiver (PHY) from Microchip. Compliant with IEEE 802.3/802.3u standards, it connects to the MAC layer via a standard RMII interface. It is one of the industry's smallest solutions, consuming up to 40% less power than existing Microchip transceivers. The device supports HP Auto-MDIX for automatic detection of straight-through or crossover cables, and features Microchip's proprietary flexPWR® technology for flexible power management. Housed in a 24-pin QFN package (4x4mm), it supports a wide 1.6V to 3.6V I/O voltage range and operates from -40°C to +85°C, making it ideal for set-top boxes, networked printers, industrial embedded systems, and other space-constrained, power-sensitive applications. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 10000
Price:$TBD
TPS92630QPWPRQ1 Three-Channel Linear LED Driver | 150mA/Ch | 5-40V | HTSSOP-16 | Texas Instruments Automotive
The TPS92630QPWPRQ1 is an automotive-grade three-channel linear LED driver from Texas Instruments, designed specifically for exterior lighting applications such as tail lamps and daytime running lights. It integrates three independent high-accuracy constant-current channels (up to 150mA each, 450mA when paralleled), supporting both analog and PWM dimming methods. The device's standout feature is its industry-leading single-LED short detection and comprehensive fault diagnostics. It reports open-circuit, short-circuit, and thermal shutdown faults via two dedicated fault pins (FAULT and FAULT_S), and supports bus connection of up to 15 devices. Housed in a 16-pin HTSSOP package (4.40mm x 5.00mm), it operates from 5V to 40V across -40°C to +125°C, and is AEC-Q100 Grade 1 qualified. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 22000
Price:$TBD
LMT87QDCKRQ1 Automotive Analog Temperature Sensor | -13.6mV/°C | SC-70 Package | Texas Instruments
The LMT87QDCKRQ1 is an automotive-grade precision CMOS temperature sensor from Texas Instruments, part of the LMT87-Q1 family. It measures a wide temperature range of -50°C to +150°C and provides a linear analog voltage output inversely proportional to temperature, with an average gain of -13.6mV/°C. The device features a typical accuracy of ±0.4°C and a maximum accuracy of ±2.7°C across the full temperature range. It supports a wide 2.7V to 5.5V supply voltage, draws only 5.4µA quiescent current, and comes in a compact 5-pin SC-70 package. The device is AEC-Q100 Grade 0 qualified for automotive applications, covering -40°C to +150°C, making it ideal for infotainment, instrument clusters, and powertrain systems, while also serving as a cost-effective alternative to thermistors. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 2980
Price:$TBD
CY62148ESL-55ZAXI 4Mbit Asynchronous SRAM | 55ns | 32-STSOP Package | Infineon MoBL®
The CY62148ESL-55ZAXI is a 4Mbit asynchronous SRAM from Infineon (formerly Cypress), part of the MoBL® ultra-low power family. It is organized as 512K x 8 and features a fast access time of 55ns. The device's key advantage lies in its support for dual voltage ranges of 2.2V~3.6V and 4.5V~5.5V, enabling flexible compatibility with both 3V and 5V systems. It also includes an automatic power-down feature with a standby current as low as 7µA. Housed in a 32-pin STSOP package, it operates across an industrial temperature range of -40°C to +85°C, making it ideal for industrial controls, data acquisition, and communication equipment requiring low power consumption and high reliability. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 800
Price:$TBD
ATMEGA32A-AU 8-Bit AVR MCU | 16MHz | 32KB Flash | 44-TQFP Package | Microchip
The ATMEGA32A-AU is a high-performance, low-power 8-bit microcontroller from Microchip, based on the enhanced AVR RISC architecture and part of the classic ATmega family. It delivers up to 16 MIPS throughput at 16MHz and features 32KB of in-system self-programmable flash, 2KB SRAM, and 1KB EEPROM. Housed in a 44-pin TQFP package (10x10mm), it integrates an 8-channel 10-bit ADC, JTAG debug interface, and rich communication peripherals including SPI, I²C, and UART. It supports a wide 2.7V to 5.5V operating voltage range and an industrial temperature range of -40°C to +85°C. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 8000
Price:$TBD
MC34063ACD-TR DC-DC Converter IC | Buck/Boost/Inverting | 1.5A | SOIC-8 Package | ST
The MC34063ACD-TR is a classic monolithic DC-DC converter control IC from STMicroelectronics, designed for applications requiring flexible voltage conversion. It integrates a temperature-compensated reference, comparator, duty-cycle-controlled oscillator with active current limiting, driver, and high-current output switch, requiring only minimal external components to build step-down, step-up, and voltage-inverting circuits. The device supports a wide 3V to 40V input voltage range, delivers a switch current up to 1.5A, operates at up to 100kHz, and features a 2% reference accuracy. Housed in an SOIC-8 package, it is rated for 0°C to +70°C. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 9999
Price:$TBD
SI8388P-IUR 8-Channel Digital Isolator | 2.5kVrms Isolation | 2Mbps | QSOP-20 Package | Skyworks
The SI8388P-IUR is a high-performance 8-channel digital isolator from Skyworks (formerly Silicon Labs), specifically designed for programmable logic controllers (PLCs) and industrial I/O modules. Its key advantage lies in integrating a bipolar digital field interface with 2.5kVrms safety isolation, allowing direct connection to 24V sinking or sourcing inputs without requiring field-side VDD. The device utilizes Skyworks' innovative CMOS-based LED emulator technology, supports input currents as low as 1mA, and features programmable debounce filtering (up to 100ms). Housed in a 20-pin QSOP package, it operates across -40°C to +125°C and complies with IEC 61131-2 standard types 1, 2, and 3, making it ideal for replacing opto-coupler isolators in industrial automation. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 1250
Price:$TBD
EFM8BB51F16G-C-QFN20R 8-Bit Microcontroller | 50MHz | 16KB Flash | QFN-20 Package | Silicon Labs
The EFM8BB51F16G-C-QFN20R is a versatile 8-bit microcontroller from Silicon Labs' EFM8 Busy Bee family, featuring an efficient CIP-51 8051 core running up to 50MHz. It integrates 16KB of Flash memory and 1.25KB of RAM, sufficient for most embedded control tasks. The standout feature of this device is its integration of rich analog and digital peripherals—including a 12-bit ADC, multi-channel PWM, and Configurable Logic Units—into a tiny 3x3mm QFN-20 package, making it ideal for PCB space-constrained applications. It operates from 1.8V to 5.5V across an industrial temperature range of -40°C to +85°C. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 80000
Price:$TBD
THGBMUG6C1LBAIL 8GB eMMC 5.1 Flash | 400MB/s Read | BGA-153 Package | KIOXIA
The THGBMUG6C1LBAIL is an 8GB eMMC 5.1 embedded flash memory from KIOXIA (formerly Toshiba Memory), housed in a highly integrated BGA-153 package (11.5x13mm). It integrates NAND flash and an eMMC controller, which handles complex tasks like ECC error correction, wear leveling, bad block management, and logical-to-physical address translation, eliminating the need for the host to manage the NAND flash directly. This device supports sequential read speeds up to 400MB/s, significantly improving system boot and loading efficiency. It operates from a wide 2.7V to 3.6V supply (VCC) across a temperature range of -25°C to +85°C. This eMMC device is a proven, mature storage solution for applications where the processor doesn't yet support UFS or where storage needs are in the moderate GB range. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 9120
Price:$TBD
SI4463-C2A-GMR High-Performance Sub-GHz Transceiver | 20dBm | -129dBm Sensitivity | QFN-20 | Silicon Labs
The SI4463-C2A-GMR is a high-performance, low-current Sub-GHz wireless transceiver from Silicon Labs, part of the EZRadioPRO family. It covers the 142MHz to 1050MHz frequency band and supports multiple modulations including (G)FSK, 4(G)FSK, (G)MSK, and OOK, with data rates up to 1Mbps. This device features exceptional -129dBm receive sensitivity and up to +20dBm output power, achieving a 146dB link budget for extended range and highly reliable communication. It operates from 1.8V to 3.6V, comes in a compact 20-QFN (4x4mm) package, and is rated for -40°C to +85°C, fully RoHS compliant. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 20000
Price:$TBD
ADM2687EBRIZ-RL7 5kV Isolated RS-485 Transceiver | 500kbps | SOIC-16 | ADI
The ADM2687EBRIZ-RL7 is a fully integrated 5kV rms signal and power isolated RS-485 transceiver from Analog Devices. Its key advantage lies in integrating iCoupler® 3-channel isolation, isoPower® DC-DC converter, and an RS-485 transceiver into a single chip, eliminating the need for an external isolated power supply. The device supports 500kbps data rate and >25kV/µs common-mode transient immunity, with ±15kV ESD protection on RS-485 I/O pins. Housed in a 16-lead wide-body SOIC package with >8mm creepage and clearance, it is suitable for industrial communication applications requiring high reliability. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 3886
Price:$TBD
PRTR5V0U2X,215 Ultra-Low Capacitance ESD Protection Diode | 1pF | SOT-143B Package | Nexperia
The PRTR5V0U2X,215 is an ultra-low capacitance, dual rail-to-rail ESD protection diode from Nexperia, designed to protect two high-speed data lines or high-frequency signal lines from damage caused by ESD and other transients. With a typical I/O-to-ground capacitance of just 1pF, it introduces minimal signal attenuation or distortion for high-speed interfaces like USB 2.0 and HDMI. The device integrates two pairs of ultra-low capacitance rail-to-rail diodes and an additional ESD protection diode to ensure signal line protection even when no supply voltage is available. Housed in a compact SOT-143B surface-mount package, it complies with IEC 61000-4-2 and provides ESD protection up to 8kV contact discharge. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 36800
Price:$TBD
MAX-M10S-00B-01 Standard Precision GNSS Module | 25mW Ultra-Low Power | LCC-18 Package | u-blox
The MAX-M10S-00B-01 is a standard precision GNSS receiver module from Swiss company u-blox, developed on the M10 positioning platform. Its standout feature is the ability to deliver excellent positioning performance at just 25mW of continuous tracking power. The module supports concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations, maintaining high availability even in challenging environments like urban canyons. Integrated LNA and SAW filter, combined with u-blox Super-S technology, ensure stable positioning accuracy even with small antennas. Housed in an LCC-18 package (9.7x10.1mm), it is pin-compatible with previous generations for easy design upgrades. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 6500
Price:$TBD
QCA8334-AL3C 4-Port Gigabit Ethernet Switch | Layer 2 Managed | QFN-88 Package | Qualcomm
The QCA8334-AL3C is a highly integrated 4-port Gigabit Ethernet switch from Qualcomm, designed for cost-effective and stable networking equipment. It integrates 4 independent MACs and PHYs, and supports flexible CPU interfaces such as SGMII, RGMII, and MII, making it suitable for routers, gateways, and industrial switches. Housed in a QFN-88 package, it operates from -40°C to +85°C and features rich Layer 2 management functions including VLAN, QoS, and IGMP snooping, as well as low-power modes. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 6000
Price:$TBD
88E6390-A0-TLA2I000 11-Port Gigabit Ethernet Switch | 8xPHY+2x2.5G SerDes | Industrial Grade
The 88E6390-A0-TLA2I000 is an 11-port Gigabit Ethernet switch from Marvell's Link Street family, specifically designed for industrial-grade applications . Its core strength lies in high integration: it integrates 8x 10/100/1000Mbps PHYs on a single chip, enabling direct connection to 8 Gigabit RJ45 ports and significantly simplifying the design of 8-port industrial switches . Furthermore, it offers two SerDes/SGMII interfaces up to 2.5Gbps for uplink or fiber, and one RGMII/MII/RMII interface for the host CPU . With support for IEEE 1588v2 precision time synchronization, TSN, and AVB, it is an ideal choice for building industrial Ethernet and real-time audio/video transmission systems . We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 9999
Price:$TBD
LT3502AIDC#TRPBF DC-DC Buck Converter | 40V Input | 500mA Output | DFN-8(2x2) | ADI
In industrial sensors, automotive electronics, or battery-powered equipment, converting an unstable high-voltage bus (like a 24V industrial supply or car battery) into a stable low-voltage rail is a fundamental system design challenge. The LT3502AIDC#TRPBF is a highly integrated, high-efficiency step-down DC-DC converter from ADI designed to solve this in a minimal footprint. It features a built-in 500mA power switch and supports a wide input voltage range of 3V to 40V, capable of withstanding harsh conditions like automotive load dump. Its 2.2MHz high switching frequency allows for the use of small, low-cost inductors and capacitors, enabling a very compact power solution within a 2mm x 2mm DFN package. The device operates from -40°C to +125°C and integrates features like internal compensation, soft-start, and short-circuit protection, simplifying design and improving system reliability. The TRPBF suffix indicates Tape & Reel packaging with 2,500 pieces per reel. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 9999
Price:$TBD
PIC16F1503T-I/SL 8-bit MCU | 20MHz | 3.5KB Flash | 14-SOIC | Microchip
In cost-sensitive applications such as industrial sensor nodes, consumer electronics, or small motor controls, selecting a moderately performant and easy-to-develop 8-bit MCU is key to project success. The PIC16F1503T-I/SL is a cost-effective 8-bit PIC microcontroller from Microchip, featuring an enhanced RISC architecture with only 49 instructions . It supports operating frequencies up to 20MHz and is equipped with 3.5KB of Flash memory and 128 bytes of RAM . The device provides 11 I/O pins , supports I2C and SPI communication interfaces , and integrates rich peripherals including an 8-channel 10-bit ADC and PWM . It operates across a wide voltage range of 2.3V to 5.5V and a temperature range of -40°C to +85°C . The T suffix indicates Tape & Reel packaging (2,600 pcs/reel) . We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 9999
Price:$TBD
AD8541ARTZ-REEL7 General-Purpose Op Amp | 1MHz | Rail-to-Rail Output | SOT-23-5 | ADI
In sensor signal conditioning, battery-powered devices, or portable instruments, selecting a low-power, rail-to-rail op amp in a compact package is key to improving system performance and integration. The AD8541ARTZ-REEL7 is a general-purpose CMOS rail-to-rail operational amplifier from Analog Devices, housed in a SOT-23-5 package. It offers a 1MHz gain bandwidth product and a 0.92V/µs slew rate , with a quiescent current of just 45µA , making it ideal for battery-powered portable equipment. The device supports a single 2.7V to 5.5V supply, features an input bias current as low as 4pA , and provides rail-to-rail input and output to maximize dynamic range . It operates across an industrial temperature range of -40°C to +125°C . The REEL7 suffix indicates Tape & Reel packaging with 3,000 pieces per reel. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 10000
Price:$TBD
ACS712ELCTR-05B-T Hall Effect Current Sensor | 5A Range | 185mV/A | SOIC-8 | Allegro
In power supplies, inverters, or motor drive systems, accurate and isolated current measurement is fundamental for system control and protection. The ACS712ELCTR-05B-T is a cost-effective Hall-effect linear current sensor from Allegro MicroSystems, providing a compact solution for these needs. This device integrates a copper current-carrying path with low-voltage side signal conditioning circuitry based on open-loop Hall effect principles. Housed in a SOIC-8 package, it measures ±5A of DC or AC current and outputs an analog voltage proportional to the sensed current. Its sensitivity of 185mV/A enables precise detection for the 5A range, with a typical output response time of 5µs. The device offers 2.1kVRMS isolation voltage and features ±1.5% linearity. Please be aware that this part's status is "Not for New Designs." We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 9999
Price:$TBD
SKY16603-632LF High-Linearity PIN Diode Limiter | 0.6~6GHz | 2-MLP Package | Skyworks
In 5G massive MIMO base stations, test instrumentation, or radar systems, the receiver front-end often faces threats from strong interferers or high-power pulses, which can saturate or even damage the Low Noise Amplifier (LNA). The SKY16603-632LF is a passive receiver protector designed to address this challenge. This high-linearity limiter module from Skyworks integrates dual PIN limiter diodes and DC blocking capacitors in a compact 2.3x2.3mm DFN package, covering an operating frequency range of 0.6 to 6 GHz. Featuring a low limiting threshold (+8 dBm typical), low insertion loss, and excellent IIP3 (29 dBm typical), it effectively suppresses high-power signals without compromising receiver sensitivity. The device can handle up to 3.1W of CW input power (TCASE = 120°C) and operates from -40°C to +105°C, making it ideal for macro base stations, small cells, satellite communications, and military radar. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 3000
Price:$TBD
CP2102N-A02-GQFN28R USB-to-UART Bridge IC | USB 2.0 | 28-QFN | Silicon Labs
In embedded system development, industrial equipment debugging, or consumer electronics, connecting a traditional UART serial port to a modern computer's USB interface is a common yet cumbersome design hurdle. The CP2102N-A02-GQFN28R is designed to simplify this process as much as possible. This highly integrated bridge chip from Silicon Labs packs a USB 2.0 full-speed controller, transceiver, clock, regulator, and UART interface into a single 28-QFN package (5x5mm). It requires no external crystal and works with minimal external components, effectively reducing BOM cost and PCB footprint. The chip operates from a 3V to 3.6V supply across an industrial temperature range (-40°C to +85°C), supporting baud rates up to 3 Mbps. It is ideal for development boards, POS terminals, medical devices, and IoT gateways. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 13500
Price:$TBD
SAM-M10Q-00B-01 GNSS Antenna Module | u-blox M10 | Built-in Antenna | Ultra-Low Power | 20-LGA
In asset trackers, portable drones, or industrial monitoring equipment, extending battery life without sacrificing positioning performance is a core design challenge. The SAM-M10Q-00B-01 is a ready-to-use GNSS positioning module from u-blox for such scenarios. Based on the u-blox M10 platform, it consumes just 37 mW (approx. 12mA@3.3V) while concurrently tracking GPS, GLONASS, Galileo, and BeiDou constellations. The module integrates a 15x15mm high-gain patch antenna, SAW filter, and LNA, enabling easy integration without RF expertise. Housed in a 20-LGA package, it operates across a temperature range of -40°C to +85°C. Whether developing industrial trackers, telematics devices, or small UAVs, this module offers an ideal positioning solution balancing performance and power. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 5000
Price:$TBD
VSC7429XJG-02 26-Port Ethernet Switch | 2.5Gbps | 672-HSBGA | Microchip Caracal-2
In mobile backhaul, enterprise access, and Carrier Ethernet networks, balancing high port density, precise network synchronization, and flexible service orchestration within limited power and space is a core system design challenge. The VSC7429XJG-02 is a highly integrated, high-performance Carrier Ethernet switch chip designed for these needs. This Caracal-2 series device from Microchip integrates 12 Gigabit Ethernet copper PHYs and the switching capability for 26 ports on a single chip. Based on the Virtualized Service Aware Architecture (VISAA), it supports MEF service delivery and IEEE 1588 precise time protocol (VeriTime technology), and includes a built-in 416MHz MIPS processor for handling OAM and performance monitoring tasks. The device comes in a 672-HSBGA package (27x27mm) and operates across a wide temperature range of -40°C to +125°C. Whether you are designing mobile backhaul equipment, microwave transmission systems, or carrier access devices, this device offers a high-performance, highly integrated Ethernet switching solution. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 1000
Price:$TBD
AD8041ARZ-REEL7 High-Speed Op Amp | 170MHz | 170V/µs | 8-SOIC | ADI
In high-speed video signal processing, ADC buffering, or portable communication equipment, balancing high bandwidth and fast settling time within a limited power budget is a core challenge in signal chain design. The AD8041ARZ-REEL7 is a high-performance, low-power voltage-feedback amplifier from Analog Devices designed for such scenarios. It operates from +3V, +5V, or ±5V supplies, offering a large-signal bandwidth of 160MHz (G=+2) and a slew rate of 160V/µs. Its rail-to-rail output swing and input range extending 200mV below the negative supply rail provide maximum dynamic range for single-supply applications. Housed in a standard 8-SOIC package, it is ideal for professional video electronics, high-speed portable devices, and general-purpose high-speed signal conditioning applications. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 12000
Price:$TBD
ADM2486BRWZ-REEL Isolated RS-485/RS-422 Transceiver | 20Mbps | 2.5kV Isolation | 16-SOIC | ADI
In industrial automation and process control systems, long-distance data transmission is often compromised by ground potential differences, common-mode noise, and surge shocks, potentially causing communication failures or equipment damage. The ADM2486BRWZ-REEL is designed specifically to solve the communication isolation challenges in these harsh scenarios. This isolated RS-485/RS-422 transceiver from ADI integrates ADI’s proprietary iCoupler® magnetic isolation technology, providing up to 2500Vrms of electrical isolation. It supports data rates up to 20Mbps and offers a common-mode transient immunity of 25kV/µs, effectively combating high-noise environments. The device comes in a 16-SOIC wide-body package, supports a wide logic-side supply voltage of 2.7V to 5.5V, and a bus-side supply of 5V. It is ideal for industrial communication, building automation, renewable energy systems, and reliable data transmission in harsh environments. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 12544
Price:$TBD
LT3799IMSE#TRPBF MSOP16 – Offline LED Driver with PFC & TRIAC Dimming
Analog Devices LT3799IMSE#TRPBF offline isolated flyback LED controller with active PFC >0.97, TRIAC dimming, no opto-coupler, and 4W–100W+ support. Ideal for commercial and industrial lighting.
Stock Count: 2795
Price:$TBD
ADXRS646BBGZ-RL Yaw Rate Gyroscope | ±250°/s | 32-CBGA Package | Analog Devices
The ADXRS646BBGZ-RL is a high-performance, low-noise, vibration-rejecting yaw rate gyroscope (angular rate sensor) from Analog Devices. Featuring an advanced differential quad-sensor design, it integrates a complete gyroscope system on a single chip, effectively rejecting the effects of linear acceleration and vibration. The device offers a measurement range of ±250°/s (extendable to ±450°/s) and provides a ratiometric analog voltage output. Housed in a compact 32-ball ceramic CBGA package (6.85x6.85mm), it operates from a 5.75V to 6.25V supply across a wide temperature range of -40°C to +105°C, with 10,000 g shock survivability. This device is ideal for industrial applications, platform stabilization, and other severe mechanical environments where shock and vibration are present. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 500
Price:$TBD
MSP430F5638IPZR 16-bit MCU | 20MHz | 256KB Flash | 100-LQFP Package | Texas Instruments
The MSP430F5638IPZR is a 16-bit ultra-low-power RISC architecture microcontroller from Texas Instruments, part of the MSP430F5xx series. It features 256KB of Flash memory and 18KB of SRAM, operating at speeds up to 20MHz. Housed in a 100-LQFP package (14x14mm), it operates from 1.8V to 3.6V across a temperature range of -40°C to +85°C. Rich peripherals include a 12-bit ADC, dual 12-bit DAC, comparators, 6-channel DMA, USB 2.0, and multiple serial communication interfaces (I2C, SPI, UART, IrDA). This device is ideally suited for industrial control, medical equipment, IoT nodes, smart grid, and other applications requiring a balance of high performance and low power consumption. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 3000
Price:$TBD
ADS54T01IZAYR NFBGA196 –12‑Bit, 750‑Msps High‑Linearity ADC with DPD Feedback Mode
Texas Instruments ADS54T01IZAYR 12‑bit 750‑Msps ADC features DDR LVDS output, 1.2‑GHz bandwidth, and DPD burst mode. Ideal for telecom, wireless infrastructure, and power amplifier linearization
Stock Count: 950
Price:$TBD
ADS7813UB SOIC-16 16‑Bit, 40 kSPS, Low‑Power SAR ADC with Flexible Input Ranges
The ADS7813UB is a monolithic, 16‑bit successive‑approximation (SAR) analog‑to‑digital converter engineered by Texas Instruments. It integrates a complete data‑acquisition solution on a single chip, including a sample‑and‑hold amplifier, internal clock, reference source, and a serial interface. Designed for precision measurement in industrial and medical environments, this ADC delivers reliable performance with minimal power consumption.
Stock Count: 2580
Price:$TBD
TMS320F240PQA 16-Bit DSP Controller | C24x 32KB Flash | 20MHz | 132-BQFP Package | Texas Instruments
The TMS320F240PQA is a 16-bit microcontroller based on the C2xx DSP core from Texas Instruments, part of the C2000™ C24x series. Designed for real-time control applications, it integrates digital signal processing capabilities with microcontroller peripherals. Operating at 20MHz, this device offers 32KB of Flash memory and 1K x 8 of RAM, and is housed in a 132-lead BQFP surface-mount package. It supports a supply voltage of 4.5V to 5.5V and operates across a temperature range of -40°C to +85°C. It is equipped with rich peripherals including SPI, SCI, and UART serial interfaces, a 16-channel 10-bit ADC, PWM generators, and a watchdog timer. This DSP controller is ideal for industrial drives, motor control, power electronics, and automation systems requiring high-performance computation and real-time responsiveness. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 1000
Price:$TBD
STM32H745IIK6 Dual-Core MCU | Cortex-M7@480MHz + M4@240MHz | 2MB Flash | UFBGA-201 Package | STMicroelectronics
The STM32H745IIK6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M7 and Cortex®-M4 dual-core architecture. The Cortex-M7 core runs up to 480MHz and the Cortex-M4 core up to 240MHz, both featuring Floating Point Units (FPU) and DSP instruction support. It integrates up to 2MB of Flash memory and 1MB of SRAM, housed in a compact 176+25 UFBGA package (10x10mm). The device supports a wide supply voltage range of 1.62V to 3.6V and operates from -40°C to +85°C. It is equipped with rich peripherals including multiple 16-bit ADCs, 12-bit DACs, advanced timers, Ethernet MAC, CAN FD interfaces, and an LCD-TFT controller. This MCU is ideal for demanding applications such as industrial equipment, consumer devices, medical instruments, and Artificial Intelligence (AI) systems. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 1008
Price:$TBD
AD7792BRUZ-REEL 16-Bit Sigma-Delta ADC | Low Noise Low Power | TSSOP-16 Package | Analog Devices
The AD7792BRUZ-REEL is a 16-bit resolution, low-noise, low-power Sigma-Delta analog-to-digital converter (ADC) from Analog Devices, designed for high-precision measurement applications. It integrates a low-noise programmable gain amplifier (PGA) for direct interface with small-signal sensors and features a precision low-drift internal bandgap reference. Operating from a single 2.7V to 5.25V supply with typical current consumption of only 400μA, this device is housed in a 16-lead TSSOP package. It provides 3 differential analog inputs and communicates via an SPI-compatible serial interface, with output data rates programmable from 4.17Hz to 470Hz. This ADC is ideal for thermocouple measurements, RTD measurements, industrial process control, instrumentation, and smart transmitters requiring precision signal conditioning. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 10000
Price:$TBD
AD5449YRUZ-REEL7 12-Bit Dual Current-Output DAC | R-2R Architecture | TSSOP-16 Package | Analog Devices
The AD5449YRUZ-REEL7 is a 12-bit resolution, dual-channel, current-output digital-to-analog converter (DAC) from Analog Devices. Featuring an R-2R architecture, it offers excellent 4-quadrant multiplication with up to 10MHz multiplying bandwidth. This device operates from a 2.5V to 5.5V single supply, provides a fast 120ns settling time, and includes integrated feedback resistors for temperature tracking and full-scale voltage output when combined with an external precision amplifier. It communicates via a 3-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP standards, and features readback and daisy-chain capabilities. It is ideally suited for portable battery-powered devices, waveform generators, programmable amplifiers, and industrial instrumentation. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 1000
Price:$TBD
AD2S1200WSTZ 12-Bit Resolver-to-Digital Converter | R/D Converter | LQFP-44 Package | Analog Devices
The AD2S1200WSTZ is a complete 12-bit resolution tracking resolver-to-digital converter from Analog Devices, integrating an on-board programmable sinusoidal oscillator that provides sine wave excitation for resolvers. Housed in a 44-lead LQFP package, it operates from a single 4.75V to 5.25V supply across an industrial temperature range of -40°C to +125°C . It employs a Type II servo loop to track inputs and convert Sin/Cos information into digital angle and velocity data. The device features system fault detection and offers both parallel and serial (SPI) 12-bit data output ports . It is ideally suited for electric vehicles, Electric Power Steering (EPS), industrial motor controls, encoder emulation, and automotive motion sensing applications requiring high-precision position detection . We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 450
Price:$TBD
AD9219ABCPZ-40 10-Bit 40 MSPS Quad ADC | Low Power LVDS | Analog Devices
The AD9219ABCPZ-40 is a high‑performance, quad‑channel, 10‑bit analog‑to‑digital converter (ADC) from Analog Devices.
Stock Count: 2955
Price:$TBD
ADMV1017BCCZ 5G mmWave Up/Down Converter | 24‑29.5GHz SiGe | Analog Devices
ADMV1017BCCZ is a SiGe microwave up/down converter for 5G mmWave (24‑29.5GHz). Features 1.5GHz bandwidth, >25dBc sideband suppression, on‑chip LO ×2/×4 multipliers, and 3GPP compliance. Ideal for 5G base stations, satellite comms, radar, and EW.
Stock Count: 2940
Price:$TBD
AD2S82AHP Resolver-to-Digital Converter | ADI R/D Converter Datasheet & Introduction
AD2S82AHP is a monolithic tracking resolver-to-digital converter (RDC) manufactured by Analog Devices. Adopting Type II servo loop ratiometric tracking technology, it supports configurable resolution of 10/12/14/16 bits. Integrated with an excitation oscillator, it delivers parallel position data and analog velocity output. Featuring strong noise immunity for long cable applications, its maximum tracking speed reaches 62400 rpm. Packaged in 44-pin LCC, it applies to servo motors, radar and optoelectronic tracking systems. This classic RDC is widely adopted in industrial and military equipment maintenance, and the original device is obsolete.
Stock Count: 1056
Price:$TBD
MT40A512M16TB-062E:R DDR4 SDRAM – 8Gb, 512Mx16, 1.6GHz, FBGA-96, Micron
Micron MT40A512M16TB-062E:R is an 8Gb DDR4 SDRAM organized as 512M x 16. 1.6GHz clock frequency, 1.14V to 1.26V supply, 96-ball FBGA package (7.5x13.5mm). Commercial temperature 0°C to 95°C. Features 8n-bit prefetch architecture, write leveling, auto self-refresh, ZQ calibration, CRC error detection, dynamic on-die termination, and data bus inversion. Ideal for servers, networking, industrial controls, and high-performance computing applications.
Stock Count: 9999
Price:$TBD
MTFC32GAZAQDW-AAT eMMC Flash – 32GB, AEC-Q104, Automotive Grade, Micron
Micron MTFC32GAZAQDW-AAT is an automotive-grade 32GB eMMC NAND Flash memory. AEC-Q104 qualified, -40°C to 105°C. TLC NAND technology, parallel interface, 200MHz clock, 2.7V to 3.6V supply. 100-ball LBGA package (14x18mm). Ideal for automotive infotainment, navigation, ADAS, and industrial embedded storage.
Stock Count: 9999
Price:$TBD
LM63635DQPWPRQ1 Automotive Buck Converter – 36V, 3.25A, AEC-Q100, TI in Stock
The LM63635DQPWPRQ1 is an automotive-grade synchronous step-down DC/DC converter from Texas Instruments. It delivers up to 3.25A output current from a 3.5V to 32V input, with adjustable output from 1V to 20V. AEC-Q100 qualified for -40°C to +125°C operation, featuring spread spectrum for low EMI, 23µA quiescent current, and 16-HTSSOP package. Ideal for automotive infotainment, ADAS, and body electronics.
Stock Count: 9999
Price:$TBD
