筛选Filter
All products
Products
TPD3F303DPVR EMI Filter | 3-Channel | 300MHz | USON-8 Package | Texas Instruments
The TPD3F303DPVR is a highly integrated three-channel EMI filter and ESD protection device from Texas Instruments (TI). It employs a C-R-C low-pass filter topology to provide EMI filtering (-3dB bandwidth of 300MHz) for the data, clock, and reset lines of SIM card interfaces, while integrated TVS diode arrays offer IEC 61000-4-2 Level 4 ESD protection (±15kV contact discharge) for the signal lines and the VCC power line. The device integrates 47Ω (clock line) and 100Ω (data, reset lines) termination resistors and is housed in an ultra-small USON-8 package (2.1×1.6mm), operating over a temperature range of -40°C to +85°C. It is ideal for portable devices such as smartphones, tablets, and mobile hotspots. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 9999
Price:$TBD
DRV8300DRGER Gate Driver | 100V | 750mA/1.5A | VQFN-24 Package | Texas Instruments
The DRV8300DRGER is a 100V three-phase half-bridge gate driver from Texas Instruments (TI), designed to drive N-channel power MOSFETs in brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) applications. The device integrates three independent half-bridge drivers, supporting up to 750mA peak source current and 1.5A sink current for fast switching of power MOSFETs to reduce switching losses. This variant features the DRV8300D architecture with integrated bootstrap diodes, using external capacitors to generate the gate drive voltage for high-side MOSFETs. It supports a 5V to 20V gate drive supply (GVDD), operates from -40°C to +125°C, and is housed in a 4×4mm VQFN-24 package, available in tape & reel (3,000 pieces/reel). Key features include adjustable dead-time, cross-conduction prevention, and BST/GVDD undervoltage lockout, making it ideal for drones, power tools, robotics, industrial automation, and other three-phase motor drive applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 30000
Price:$TBD
TPS74518PQWDRVRQ1 LDO Regulator | 1.8V/500mA | 6-WSON Package | Texas Instruments Automotive Grade
The TPS74518PQWDRVRQ1 is a 500mA ultra-low-dropout (LDO) linear regulator from Texas Instruments (TI), part of the TPS745-Q1 family. This device provides a fixed 1.8V output voltage, supports an input range of 1.5V to 6.0V, and features a typical dropout voltage of 225mV. It offers high PSRR of 45dB at 100kHz and ±1.5% output accuracy, integrating power-good (PG) indication, enable control, output discharge, overcurrent protection, and thermal shutdown. This device is AEC-Q100 qualified for automotive applications, housed in a 6-WSON (2×2mm) wettable-flank package, and operates from -40°C to +125°C. It is ideal for automotive infotainment, camera modules, instrument clusters, radar, and other space-constrained, high-reliability applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 12000
Price:$TBD
UCC2895DWTR Phase-Shifted Full-Bridge Controller | 1MHz | 20-SOIC Package | Texas Instruments
The UCC2895DWTR is an enhanced phase-shifted full-bridge PWM controller from Texas Instruments (TI), serving as an upgrade to the UCC3895 . It achieves control of the full-bridge power stage through phase-shift switching, enabling resonant zero-voltage switching (ZVS) for high efficiency at high frequencies . The device supports voltage-mode, peak current-mode, or average current-mode control and operates at frequencies up to 1MHz with a typical supply current of just 5mA at 500kHz . Housed in a 20-pin SOIC package (7.5mm wide), it operates from a 10V to 16.5V supply across a temperature range of -40°C to +85°C . This controller features programmable output on-delay, adaptive delay set, bidirectional oscillator synchronization, 0% to 100% duty cycle control, and programmable soft start/stop . It is ideally suited for off-line power supplies, telecom and datacom power supplies, distributed power architectures, and high-density power modules . We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 8000
Price:$TBD
TPD3S716QDBQRQ1 USB Interface Protection IC | 18V OVP | 2.4A Adjustable Current Limit | 16-SSOP Package | Texas Instruments Automotive Grade
The TPD3S716QDBQRQ1 is an automotive-grade single-chip USB interface protection device from Texas Instruments (TI), providing short-to-battery, short-circuit, and ESD protection for the VBUS and data lines (D+/D-) of automotive USB ports. The device integrates high-bandwidth (1GHz) data switches that support USB2.0 high-speed data rates while delivering up to 18V overvoltage protection. Its VBUS pin supports an adjustable current limit from 0.5A to 2.4A, compatible with USB BC1.2 and USB Type-C charging schemes. Housed in a 16-SSOP package, it operates over a temperature range of -40°C to +125°C and is AEC-Q100 qualified. This device is ideal for automotive infotainment systems, USB hubs, and other in-vehicle applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 9999
Price:$TBD
TPS259571DSGT eFuse | 2.7-18V | 4A | 34mΩ | WSON-8 Package | Texas Instruments
The TPS259571DSGT is a highly integrated electronic fuse (eFuse) from Texas Instruments (TI), part of the TPS2595xx family. The device operates over a wide input voltage range of 2.7V to 18V and can deliver up to 4A of continuous output current with an accurate 0.5A to 4A adjustable current limit. It integrates an internal FET with a low on-resistance of 34mΩ (typical) and features fast overvoltage protection clamp (5µs typical response time), over-temperature protection, undervoltage lockout, and adjustable output slew rate control. Housed in a compact 8-WSON package (2x2mm), it operates over a temperature range of -40°C to +125°C. This device is ideal for hot-swap systems, solid-state drives (SSD), industrial systems, and set-top boxes. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 10000
Price:$TBD
TS5A23157RSER Dual Analog Switch | SPDT | 10Ω | UQFN-10 Package | Texas Instruments
The TS5A23157RSER is a dual single-pole double-throw (SPDT) analog switch from Texas Instruments (TI), designed for single-supply operation from 1.65V to 5.5V. It features an ultra-low 10Ω on-resistance and supports a bandwidth up to 220MHz, allowing bidirectional transmission of digital and analog signals up to 5.5V (peak). Housed in a compact 10-pin UQFN package (1.5×2mm), the device offers break-before-make switching, low charge injection, and low total harmonic distortion, making it ideal for sample-and-hold circuits, audio/video signal routing, and battery-powered equipment. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 10000
Price:$TBD
DAC60501ZDQFR 12-bit DAC | SPI/I2C Interface | WSON-8 Package | Texas Instruments
The DAC60501ZDQFR is a high-precision, low-power, 12-bit voltage-output digital-to-analog converter (DAC) from Texas Instruments (TI). Part of the DACx0501 family, it integrates a 2.5V, 5ppm/°C high-precision internal voltage reference, providing full-scale output ranges of 1.25V, 2.5V, or 5V. The device features a pin-selectable serial interface (SPI up to 50MHz or I2C) and includes a power-on-reset (POR) circuit that ensures the DAC output powers up at zero scale or midscale. Housed in an ultra-compact 8-pin WSON package (2mm×2mm), it operates from 2.7V to 5.5V across a -40°C to +125°C temperature range. This device is ideal for oscilloscopes, data acquisition, base stations, analog output modules, and industrial control applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 5000
Price:$TBD
TPS92630QPWPRQ1 Three-Channel Linear LED Driver | 150mA/Ch | 5-40V | HTSSOP-16 | Texas Instruments Automotive
The TPS92630QPWPRQ1 is an automotive-grade three-channel linear LED driver from Texas Instruments, designed specifically for exterior lighting applications such as tail lamps and daytime running lights. It integrates three independent high-accuracy constant-current channels (up to 150mA each, 450mA when paralleled), supporting both analog and PWM dimming methods. The device's standout feature is its industry-leading single-LED short detection and comprehensive fault diagnostics. It reports open-circuit, short-circuit, and thermal shutdown faults via two dedicated fault pins (FAULT and FAULT_S), and supports bus connection of up to 15 devices. Housed in a 16-pin HTSSOP package (4.40mm x 5.00mm), it operates from 5V to 40V across -40°C to +125°C, and is AEC-Q100 Grade 1 qualified. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 22000
Price:$TBD
LMT87QDCKRQ1 Automotive Analog Temperature Sensor | -13.6mV/°C | SC-70 Package | Texas Instruments
The LMT87QDCKRQ1 is an automotive-grade precision CMOS temperature sensor from Texas Instruments, part of the LMT87-Q1 family. It measures a wide temperature range of -50°C to +150°C and provides a linear analog voltage output inversely proportional to temperature, with an average gain of -13.6mV/°C. The device features a typical accuracy of ±0.4°C and a maximum accuracy of ±2.7°C across the full temperature range. It supports a wide 2.7V to 5.5V supply voltage, draws only 5.4µA quiescent current, and comes in a compact 5-pin SC-70 package. The device is AEC-Q100 Grade 0 qualified for automotive applications, covering -40°C to +150°C, making it ideal for infotainment, instrument clusters, and powertrain systems, while also serving as a cost-effective alternative to thermistors. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 2980
Price:$TBD
MSP430F5638IPZR 16-bit MCU | 20MHz | 256KB Flash | 100-LQFP Package | Texas Instruments
The MSP430F5638IPZR is a 16-bit ultra-low-power RISC architecture microcontroller from Texas Instruments, part of the MSP430F5xx series. It features 256KB of Flash memory and 18KB of SRAM, operating at speeds up to 20MHz. Housed in a 100-LQFP package (14x14mm), it operates from 1.8V to 3.6V across a temperature range of -40°C to +85°C. Rich peripherals include a 12-bit ADC, dual 12-bit DAC, comparators, 6-channel DMA, USB 2.0, and multiple serial communication interfaces (I2C, SPI, UART, IrDA). This device is ideally suited for industrial control, medical equipment, IoT nodes, smart grid, and other applications requiring a balance of high performance and low power consumption. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 3000
Price:$TBD
ADS54T01IZAYR NFBGA196 –12‑Bit, 750‑Msps High‑Linearity ADC with DPD Feedback Mode
Texas Instruments ADS54T01IZAYR 12‑bit 750‑Msps ADC features DDR LVDS output, 1.2‑GHz bandwidth, and DPD burst mode. Ideal for telecom, wireless infrastructure, and power amplifier linearization
Stock Count: 950
Price:$TBD
ADS7813UB SOIC-16 16‑Bit, 40 kSPS, Low‑Power SAR ADC with Flexible Input Ranges
The ADS7813UB is a monolithic, 16‑bit successive‑approximation (SAR) analog‑to‑digital converter engineered by Texas Instruments. It integrates a complete data‑acquisition solution on a single chip, including a sample‑and‑hold amplifier, internal clock, reference source, and a serial interface. Designed for precision measurement in industrial and medical environments, this ADC delivers reliable performance with minimal power consumption.
Stock Count: 2580
Price:$TBD
