筛选Filter
All products
Products
ADP5054ACPZ-R7 LFCSP-48 – Quad Buck Regulator Integrated Power Solution
Analog Devices ADP5054ACPZ quad synchronous buck regulator with 4.5V‑15.5V input, programmable 6A output per channel, 250kHz‑2MHz switching – ideal for FPGA and SoC power.
Stock Count: 6500
Price:$TBD
AD22100SRZ SOIC8 – Voltage Output Temperature Sensor with Signal Conditioning in Stock
Analog Devices AD22100SRZ analog temperature sensor with ‑50°C to +150°C range, 22.5mV/°C ratiometric output, and built‑in signal conditioning – ideal for HVAC, industrial, and automotive applications.
Stock Count: 12863
Price:$TBD
LTC3779HFE#TRPBF LTC3779HFE#PBF TSSOP38– 150V Extended‑Temperature Synchronous Buck‑Boost DC/DC Controller
Analog Devices LTC3779HFE 150V synchronous buck‑boost DC/DC controller with 4.5V‑150V input/output, up to 99% efficiency, and ‑40°C to +150°C junction temperature – ideal for automotive, industrial, and military high‑reliability power designs.
Stock Count: 4055
Price:$TBD
LTC3779IFE#TRPBF LTC3779IFE#PBF TSSOP38-– 150V Synchronous Buck‑Boost DC/DC Controller
Analog Devices LTC3779IFE 150V synchronous buck‑boost DC/DC controller with 4.5V‑150V input/output, up to 99% efficiency, and ‑40°C to +125°C operation. Ideal for industrial, automotive, and medical power designs.
Stock Count: 5066
Price:$TBD
LTC3779EFE#TRPBF LTC3779EFE#PBF TSSOP38-150V Synchronous Buck‑Boost DC/DC Controller
Analog Devices LTC3779EFE 150V synchronous buck‑boost DC/DC controller with 4.5V‑150V input/output, up to 99% efficiency – ideal for industrial, automotive, medical, and military power designs.
Stock Count: 9999
Price:$TBD
ADAU1777BCBZRL WLCSP-36 Low‑Latency Audio Codec with DSP for ANC
Analog Devices ADAU1777BCBZRL low‑power audio codec with 4 ADCs, 2 DACs, audio processor, 5µs latency, 102dB SNR – ideal for ANC headphone designs.
Stock Count: 10550
Price:$TBD
LTC2376CMS-18#TRPBF MSOP8 – 18‑Bit 250ksps SAR ADC with 102dB SNR
Analog Devices LTC2376CMS-18#TRPBF 18‑bit 250ksps low power SAR ADC with 102dB SNR, ±1.75LSB INL, SPI interface, and digital gain compression. Ideal for medical imaging and data acquisition.
Stock Count: 3451
Price:$TBD
LTC1293DCSW#TRPBF SOP16 – 12‑Bit Data Acquisition System
Analog Devices LTC1293DCSW#TRPBF 12‑bit data acquisition system with 8‑channel MUX, SAR ADC, 46.5 kS/s, and serial/parallel interface. Ideal for process control and battery instruments.
Stock Count: 2650
Price:$TBD
AD6674BCPZ-1000 AD6674BCPZRL7-1000 LFCSP-64 –385 MHz Bandwidth IF Diversity Receiver with Dual 14‑Bit 1000 MSPS ADCs
Analog Devices AD6674BCPZ‑1000 385 MHz IF diversity receiver with dual 14‑bit 1000 MSPS ADCs, JESD204B output, NSR, and VDR. Ideal for 4G/5G, radar, and broadband wireless.
Stock Count: 1950
Price:$TBD
AD6674BCPZ-500 AD6674BCPZRL7-500 LFCSP-64 385 MHz Bandwidth IF Diversity Receiver with Dual 14‑Bit 500 MSPS ADCs
Analog Devices AD6674BCPZ‑500 385 MHz IF diversity receiver with dual 14‑bit 500 MSPS ADCs, JESD204B output, NSR, and VDR. Ideal for 4G/5G, radar, and broadband wireless.
Stock Count: 9650
Price:$TBD
AD6674BCPZRL7-750 LFCSP-64 – 385 MHz Bandwidth IF Diversity Receiver with Dual 14‑Bit ADCs
Analog Devices AD6674BCPZRL7‑750 385 MHz IF diversity receiver with dual 14‑bit 750 MSPS ADCs, JESD204B output, NSR, and VDR. Ideal for 3G/4G/LTE and broadband wireless.
Stock Count: 3960
Price:$TBD
AD1674JRZ SOP28 12‑Bit 100 kSPS ADC – Sampling Converter
Analog Devices AD1674JRZ 12‑bit 100 kSPS SAR ADC with on‑board SHA, 10V reference, parallel interface, and flexible ±5V/±10V inputs. Ideal for data acquisition and instrumentation.
Stock Count: 3620
Price:$TBD
ADUCM420BCBZ WLCSP-64– Precision MCU with Arm Cortex-M33 & 12-Bit ADC
Analog Devices ADUCM420BCBZ precision analog microcontroller with 160MHz Arm Cortex-M33, 512KB Flash, 12-bit 2MSPS ADC, 12 DACs, and MDIO interface. Ideal for optical networking and industrial control.
Stock Count: 2194
Price:$TBD
ADSP-21562KSWZ4 – 400MHz SHARC+ DSP for Automotive and Consumer Audio Applications
Analog Devices ADSP-21562KSWZ4 SHARC+ single‑core DSP with 400MHz instruction rate, 640KB L1 SRAM, and DDR3 interface. Ideal for automotive audio, ANC, and consumer sound systems.
Stock Count: 1685
Price:$TBD
AD8572ARZ-REEL Zero-Drift Op Amp | 1.5MHz | Dual Channel | 8-SOIC Package | Analog Devices
The AD8572ARZ-REEL is a dual-channel, zero-drift, rail-to-rail input/output operational amplifier from Analog Devices (ADI), part of the AD857x family. This device features ultra-low offset voltage (1µV typical) and extremely low offset voltage drift (0.005 µV/°C), operating from a single 2.7V to 5V supply. It offers a 1.5MHz gain bandwidth product, 0.4V/µs slew rate, 140dB typical CMRR, and 145dB typical high gain, making it ideal for precision signal conditioning, sensor interfaces, and medical instruments where error sources cannot be tolerated. The device is housed in a standard 8-SOIC package (3.90mm wide) and operates over a -40°C to +125°C temperature range. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 15000
Price:$TBD
ADM2483BRWZ-REEL Isolated RS-485 Transceiver | 500kbps | 2500Vrms Isolation | 16-SOIC Package | Analog Devices
The ADM2483BRWZ-REEL is an integrated, galvanically isolated half-duplex RS-485 transceiver from Analog Devices (ADI). Using iCoupler® technology, it combines a 3-channel isolator, a three-state differential line driver, and a differential input receiver in a single package . The device complies with ANSI EIA/TIA-485-A and ISO 8482:1987(E) standards, supports data rates up to 500kbps, and offers common-mode transient immunity (CMTI) of 25kV/µs . The logic side operates from a 3V or 5V supply, while the bus side requires a 5V supply only, with an operating temperature range of -40°C to +85°C . The device supports up to 256 nodes on the bus and features slew-rate-limited driver outputs and true fail-safe receiver inputs . Housed in a 16-SOIC wide-body package (7.50mm), it is available in tape and reel packaging (1000 pieces/reel) and is ideal for low-power RS-485/RS-422 networks, isolated interfaces, building control networks, and multipoint data transmission systems . We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 14771
Price:$TBD
ADM660ARZ-REEL7 Charge Pump Voltage Converter | 1.5-7V Input | 100mA Output | SOIC-8 Package | Analog Devices
The ADM660ARZ-REEL7 is a CMOS switched-capacitor voltage converter (charge pump) from Analog Devices (ADI) that can invert (VOUT = -VIN) or double (VOUT = 2×VIN) the input supply voltage. Input voltages from +1.5V to +7V can be inverted to a -1.5V to -7V negative output supply, making it ideal for generating a negative rail in single-supply systems. The device requires only two small external capacitors, delivers up to 100mA output current, and achieves >90% efficiency at 50mA and >80% at 100mA. The FC pin selects 25kHz or 120kHz charge-pump operation to optimize capacitor size and quiescent current. This device is a pin-compatible upgrade for MAX660, MAX665, and ICL7660. Housed in an SOIC-8 package, it operates from -40°C to +85°C and is ideal for handheld instruments, portable computers, remote data acquisition, and op-amp power supplies. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 9999
Price:$TBD
ADXRS453BRGZ Digital Gyroscope | ±300°/s | SPI Interface | SOIC-16 Package | ADI High-Vibration Industrial Grade
The ADXRS453BRGZ is a high-vibration rejection digital Z-axis (yaw) angular rate gyroscope from Analog Devices (ADI), designed specifically for harsh industrial environments with shock and vibration. It employs an advanced differential quad-sensor design that effectively rejects the influence of linear acceleration, offering typical vibration rejection of 0.01°/sec/g. The device provides a ±300°/s measurement range and outputs 16-bit digital data via an SPI interface with a sensitivity of 80 LSB/(°/s). Housed in a 16-lead SOIC-CAV plastic cavity package, it operates from a 3.15V to 5.25V supply with a typical current of 6mA and covers a temperature range of -40°C to +105°C. Built-in continuous self-test architecture and temperature compensation ensure long-term stability and reliability. This gyroscope is ideal for industrial equipment, platform stabilization, instrumentation, and other high-performance applications. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 6000
Price:$TBD
MAX2870ETJ+T Frequency Synthesizer | 23.5MHz~6GHz | TQFN-32 Package | Analog Devices / Maxim
The MAX2870ETJ+T is an ultra-wideband phase-locked loop (PLL) frequency synthesizer from Analog Devices (ADI) / Maxim Integrated, featuring integrated voltage-controlled oscillators (VCOs) and supporting both integer-N and fractional-N modes. It is capable of synthesizing frequencies from 23.5MHz to 6.0GHz while maintaining superior phase noise and spurious performance. Housed in a 5mm x 5mm, 32-pin TQFN package, it operates from a 3.0V to 3.6V supply across a -40°C to +85°C temperature range. The device provides dual differential output drivers, independently programmable for -4dBm to +5dBm output power, making it ideal for high-performance RF applications including wireless infrastructure, test and measurement, satellite communications, and clock generation. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 5000
Price:$TBD
ADM2687EBRIZ-RL7 5kV Isolated RS-485 Transceiver | 500kbps | SOIC-16 | ADI
The ADM2687EBRIZ-RL7 is a fully integrated 5kV rms signal and power isolated RS-485 transceiver from Analog Devices. Its key advantage lies in integrating iCoupler® 3-channel isolation, isoPower® DC-DC converter, and an RS-485 transceiver into a single chip, eliminating the need for an external isolated power supply. The device supports 500kbps data rate and >25kV/µs common-mode transient immunity, with ±15kV ESD protection on RS-485 I/O pins. Housed in a 16-lead wide-body SOIC package with >8mm creepage and clearance, it is suitable for industrial communication applications requiring high reliability. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 3886
Price:$TBD
LT3502AIDC#TRPBF DC-DC Buck Converter | 40V Input | 500mA Output | DFN-8(2x2) | ADI
In industrial sensors, automotive electronics, or battery-powered equipment, converting an unstable high-voltage bus (like a 24V industrial supply or car battery) into a stable low-voltage rail is a fundamental system design challenge. The LT3502AIDC#TRPBF is a highly integrated, high-efficiency step-down DC-DC converter from ADI designed to solve this in a minimal footprint. It features a built-in 500mA power switch and supports a wide input voltage range of 3V to 40V, capable of withstanding harsh conditions like automotive load dump. Its 2.2MHz high switching frequency allows for the use of small, low-cost inductors and capacitors, enabling a very compact power solution within a 2mm x 2mm DFN package. The device operates from -40°C to +125°C and integrates features like internal compensation, soft-start, and short-circuit protection, simplifying design and improving system reliability. The TRPBF suffix indicates Tape & Reel packaging with 2,500 pieces per reel. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 9999
Price:$TBD
AD8541ARTZ-REEL7 General-Purpose Op Amp | 1MHz | Rail-to-Rail Output | SOT-23-5 | ADI
In sensor signal conditioning, battery-powered devices, or portable instruments, selecting a low-power, rail-to-rail op amp in a compact package is key to improving system performance and integration. The AD8541ARTZ-REEL7 is a general-purpose CMOS rail-to-rail operational amplifier from Analog Devices, housed in a SOT-23-5 package. It offers a 1MHz gain bandwidth product and a 0.92V/µs slew rate , with a quiescent current of just 45µA , making it ideal for battery-powered portable equipment. The device supports a single 2.7V to 5.5V supply, features an input bias current as low as 4pA , and provides rail-to-rail input and output to maximize dynamic range . It operates across an industrial temperature range of -40°C to +125°C . The REEL7 suffix indicates Tape & Reel packaging with 3,000 pieces per reel. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 10000
Price:$TBD
AD8041ARZ-REEL7 High-Speed Op Amp | 170MHz | 170V/µs | 8-SOIC | ADI
In high-speed video signal processing, ADC buffering, or portable communication equipment, balancing high bandwidth and fast settling time within a limited power budget is a core challenge in signal chain design. The AD8041ARZ-REEL7 is a high-performance, low-power voltage-feedback amplifier from Analog Devices designed for such scenarios. It operates from +3V, +5V, or ±5V supplies, offering a large-signal bandwidth of 160MHz (G=+2) and a slew rate of 160V/µs. Its rail-to-rail output swing and input range extending 200mV below the negative supply rail provide maximum dynamic range for single-supply applications. Housed in a standard 8-SOIC package, it is ideal for professional video electronics, high-speed portable devices, and general-purpose high-speed signal conditioning applications. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 12000
Price:$TBD
ADM2486BRWZ-REEL Isolated RS-485/RS-422 Transceiver | 20Mbps | 2.5kV Isolation | 16-SOIC | ADI
In industrial automation and process control systems, long-distance data transmission is often compromised by ground potential differences, common-mode noise, and surge shocks, potentially causing communication failures or equipment damage. The ADM2486BRWZ-REEL is designed specifically to solve the communication isolation challenges in these harsh scenarios. This isolated RS-485/RS-422 transceiver from ADI integrates ADI’s proprietary iCoupler® magnetic isolation technology, providing up to 2500Vrms of electrical isolation. It supports data rates up to 20Mbps and offers a common-mode transient immunity of 25kV/µs, effectively combating high-noise environments. The device comes in a 16-SOIC wide-body package, supports a wide logic-side supply voltage of 2.7V to 5.5V, and a bus-side supply of 5V. It is ideal for industrial communication, building automation, renewable energy systems, and reliable data transmission in harsh environments. We supply 100% original, new products with ample stock and fast delivery.
Stock Count: 12544
Price:$TBD
LT3799IMSE#TRPBF MSOP16 – Offline LED Driver with PFC & TRIAC Dimming
Analog Devices LT3799IMSE#TRPBF offline isolated flyback LED controller with active PFC >0.97, TRIAC dimming, no opto-coupler, and 4W–100W+ support. Ideal for commercial and industrial lighting.
Stock Count: 2795
Price:$TBD
ADXRS646BBGZ-RL Yaw Rate Gyroscope | ±250°/s | 32-CBGA Package | Analog Devices
The ADXRS646BBGZ-RL is a high-performance, low-noise, vibration-rejecting yaw rate gyroscope (angular rate sensor) from Analog Devices. Featuring an advanced differential quad-sensor design, it integrates a complete gyroscope system on a single chip, effectively rejecting the effects of linear acceleration and vibration. The device offers a measurement range of ±250°/s (extendable to ±450°/s) and provides a ratiometric analog voltage output. Housed in a compact 32-ball ceramic CBGA package (6.85x6.85mm), it operates from a 5.75V to 6.25V supply across a wide temperature range of -40°C to +105°C, with 10,000 g shock survivability. This device is ideal for industrial applications, platform stabilization, and other severe mechanical environments where shock and vibration are present. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 500
Price:$TBD
AD7792BRUZ-REEL 16-Bit Sigma-Delta ADC | Low Noise Low Power | TSSOP-16 Package | Analog Devices
The AD7792BRUZ-REEL is a 16-bit resolution, low-noise, low-power Sigma-Delta analog-to-digital converter (ADC) from Analog Devices, designed for high-precision measurement applications. It integrates a low-noise programmable gain amplifier (PGA) for direct interface with small-signal sensors and features a precision low-drift internal bandgap reference. Operating from a single 2.7V to 5.25V supply with typical current consumption of only 400μA, this device is housed in a 16-lead TSSOP package. It provides 3 differential analog inputs and communicates via an SPI-compatible serial interface, with output data rates programmable from 4.17Hz to 470Hz. This ADC is ideal for thermocouple measurements, RTD measurements, industrial process control, instrumentation, and smart transmitters requiring precision signal conditioning. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 10000
Price:$TBD
AD5449YRUZ-REEL7 12-Bit Dual Current-Output DAC | R-2R Architecture | TSSOP-16 Package | Analog Devices
The AD5449YRUZ-REEL7 is a 12-bit resolution, dual-channel, current-output digital-to-analog converter (DAC) from Analog Devices. Featuring an R-2R architecture, it offers excellent 4-quadrant multiplication with up to 10MHz multiplying bandwidth. This device operates from a 2.5V to 5.5V single supply, provides a fast 120ns settling time, and includes integrated feedback resistors for temperature tracking and full-scale voltage output when combined with an external precision amplifier. It communicates via a 3-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP standards, and features readback and daisy-chain capabilities. It is ideally suited for portable battery-powered devices, waveform generators, programmable amplifiers, and industrial instrumentation. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 1000
Price:$TBD
AD2S1200WSTZ 12-Bit Resolver-to-Digital Converter | R/D Converter | LQFP-44 Package | Analog Devices
The AD2S1200WSTZ is a complete 12-bit resolution tracking resolver-to-digital converter from Analog Devices, integrating an on-board programmable sinusoidal oscillator that provides sine wave excitation for resolvers. Housed in a 44-lead LQFP package, it operates from a single 4.75V to 5.25V supply across an industrial temperature range of -40°C to +125°C . It employs a Type II servo loop to track inputs and convert Sin/Cos information into digital angle and velocity data. The device features system fault detection and offers both parallel and serial (SPI) 12-bit data output ports . It is ideally suited for electric vehicles, Electric Power Steering (EPS), industrial motor controls, encoder emulation, and automotive motion sensing applications requiring high-precision position detection . We supply 100% original, new products with ample stock, fast delivery, and professional technical support.
Stock Count: 450
Price:$TBD
AD9219ABCPZ-40 10-Bit 40 MSPS Quad ADC | Low Power LVDS | Analog Devices
The AD9219ABCPZ-40 is a high‑performance, quad‑channel, 10‑bit analog‑to‑digital converter (ADC) from Analog Devices.
Stock Count: 2955
Price:$TBD
ADMV1017BCCZ 5G mmWave Up/Down Converter | 24‑29.5GHz SiGe | Analog Devices
ADMV1017BCCZ is a SiGe microwave up/down converter for 5G mmWave (24‑29.5GHz). Features 1.5GHz bandwidth, >25dBc sideband suppression, on‑chip LO ×2/×4 multipliers, and 3GPP compliance. Ideal for 5G base stations, satellite comms, radar, and EW.
Stock Count: 2940
Price:$TBD
AD2S82AHP Resolver-to-Digital Converter | ADI R/D Converter Datasheet & Introduction
AD2S82AHP is a monolithic tracking resolver-to-digital converter (RDC) manufactured by Analog Devices. Adopting Type II servo loop ratiometric tracking technology, it supports configurable resolution of 10/12/14/16 bits. Integrated with an excitation oscillator, it delivers parallel position data and analog velocity output. Featuring strong noise immunity for long cable applications, its maximum tracking speed reaches 62400 rpm. Packaged in 44-pin LCC, it applies to servo motors, radar and optoelectronic tracking systems. This classic RDC is widely adopted in industrial and military equipment maintenance, and the original device is obsolete.
Stock Count: 1056
Price:$TBD
